UV Accelerated Aging Tester Machine
Type Code: Q8-UV3
+Standard:
The product can be designed by following the Standard of GB/T 14522-93(China National Standard of Accelerated Aging Test), ASTM G154, D4587-91,ISO 11507/4892-3, NE 927-6 etc.
+Power: AC 220V-50HZ-1∮3wire-25A (voltage error should be less than 10%)
+Technical Parameters:
Effective Radiation Range 900×210mm (W×H)
Light Center Distance 70mm
Wavelength Range UVA-340:315~400nm
Radiation Intensity Adjustable within 1.0w/ m2/340nm
Temperature Accuracy 0.1℃
UV Light Temperature Range 50℃~70℃/Acceptable Error±3℃
Water Spray Temperature Range 40℃~60℃/Acceptable Error±3℃
Temperature Control PID Self-Adjust
Humidity Range 45%~98%R.H
Water Sink Water Depth less than 25mm (automatic control)
Environment Of Placing Tester 5~35℃、45%~85%R.H、Away from the wall 300mm
Samples Away from UV light 50mm
+Main Principle:
-Q8-UV3 Accelerated Aging Tester adopts fluorescent UV light UVA-340 and the water-spray system in order to imitate the damage of sunlight, rain, humidity etc.
The samples is under UV radiation damage and the water spray damage circularly.The damage intensity would be more than 1o times of the damage in the natural environment.
-The damage is like: fading, changing color, delamination, haze, bubbles, embrittlement , aging, oxidation etc.
+Sample Self
-Samples Dimension:75×150mm, Maximum Thickness:20mm (Customization is available)
-Samples Quantity :About 24 pieces at one time (for reference)
+UV light :
-There are 8 UV lights installed inside the tester.
-Two type of UV light for option: UVA-340 and UVB-313
-UVA-340: spectral radiation intensity focus on 340nm wavelength
-UVB-313 spectral radiation intensity focus on 313nm wavelength
-Uselife cycle of the UV light: 1800～2500hours
-Because the radiation intensity is becoming weak after using, so after the 25% of the uselife circle, please replace one of the “old UV light ” by “non-used UV light”, then the Radiation Intensity will be constant.
+Black Board:
-Temperature Deviation of different pieces of test samples:≤4% （the temperature is even on the surfaces of the samples）
-Temperature Inspector:Pt-100 Sensor(±2.0℃) (Accurately inspecting the temperature)
-Temperature range:40-93℃±10%
+Water Control:
-Water vapour reaches the code face of samples and become water.
-Water Sink Temperature Range :40~60℃
+Timing Control
Timing range: 0~9999H(including cumulative function and Memory when power lose unexpectedly )
+Security：
-If the temperature is oven 93℃±10%, the system will shut off the Light and Heater and start to cool.
-Water Sink Alarm.
+Tester Machine Size
-External Dimension:H1550mm×W1350mm×D510 mm
Notes:Protruded Parts is not counted into the Dimension.
-Weight； about 136 kg
China Ucolin Glass Lamination Solution Experts:
-Silicone Vacuuming Bag for EVA Glass Laminating Machine/Privacy Glass Laminating
-Silicone Rubber Sheet Manufacturer for Solar EVA Photovoltaic Panel Encapsulation
([email protected]/www.ucolin.com/[email protected]/[email protected])
