Mail: UC@UCOLIN.COM green tape, silicone vacuum bag, teflon mesh – Page 37 – Green Tape, Silicone bag and Vacumming Mesh for glass laminating

Cerium Oxide CeO2 Millstone Polishing Powder 668-2

Main technical data:
REO≥88%
CeO2/REO≥83%
Fluorine content：2.8%
Average granularity D50：1.5μm
Granularity: 1200# -1500#
PH value: 7
Color: Light yellow

Cerium Oxide CeO2 Millstone Polishing Powder 668-2 is especially used for polishing millstone processing. Compared with other normal crystal polishing powder, this Cerium Oxide CeO2 Millstone Polishing Powder 668-2 owns there advantages: strong cutting ability, fast polishing speed, great finish smoothness, good suspension property, don’t subside. Cerium Oxide CeO2 Millstone Polishing Powder 668-2 is 3 times better then other brand polishing powder.

Main features:
1. High polishing speed, great grinding ability, no scratch.
2. Small amount and low concentration of Cerium Oxide CeO2 Millstone Polishing Powder 668-2 can make the optimum polishing effect. Save cost.
3. Good polishing brightness, High content of Cerium Oxide, reasonable collocation of the crudeness and fineness, applicable to polishing millstone.
4-Good suspensibility, not easy to settle. And even if the powder is settled for a long time, it is still easy to stir up without bubbles.
5- Environmental-friendly, neutral in PH value, water-fast, good adhesive force, easy to wash, no odors, humidity-resistant, long life time.

Applicable fields:
This serial of polishing powder is applicable for the final polishing of millstone.

Packing:
Inner packing: plastic bag,
Weight: 5kg per bag.
Outer packing: cardboard carton, cardboard barrel, plastic barrel
Net Weight:
20kg/ cardboard carton, 25kg/ cardboard carton,
40kg /cardboard barrel, 50kg /cardboard barrel,
20kg/ plastic barrel, 25kg/ plastic barrel.

All rights reserved by UCOLIN GLAZING SUPPORT:
www.Ucolin.com
Main Products: Silicone vacuum bag for EVA laminating furnace, Silicone Sheet, Glass Edging Wheels, Polishing Powders.

Cerium Oxide CeO2 Millstone Polishing Powder 668-2 by Peter Lin

Cerium Oxide CeO2 Polishing Powder in Crystal

Cerium Oxide CeO2 Polishing Powder in Crystal
Cerium Oxide CeO2 Polishing Powder in Crystal
UCO-668
Model: Crystal Polishing Powder szf-668
Main technical data:
REO≥85%
CeO2/REO≥80%
Fluorine content：3%
Average granularity D50：1.5μm
Granularity: 1200# -1500#
PH value: 7
Color: Light yellow

Crystal Polishing Powder is especially used for polishing crystal, crystal lamp etc. Compared with other normal crystal polishing powder, this crystal polishing powder can decrease 11% of the polishing powder liquid concentration, and the polishing effect can increase 35%. Besides, the gloss finish of the finished product can get higher grade, and the yellow polishing powder’s life time increases 30%.

Main features:
1. High polishing speed, great grinding ability, no scratch.
2. Small amount and low concentration of polishing powder can make the optimum polishing effect.
3. Good polishing brightness, High content of Cerium Oxide, reasonable collocation of the crudeness and fineness, applicable to polishing various crystals, rhinestone, millestone, etc.
4. Good suspensibility, not easy to settle. And even if the powder is settled for a long time, it is still easy to stir up without bubbles.
5. Environmental-friendly, neutral in PH value, water-fast, good adhesive force, easy to wash, no odors, humidity-resistant, long life time.

Applicable fields:
This serial of polishing powder is applicable for the final polishing of crystals, crystal lamp, crystal accessories.

Packing:
Inner packing: plastic bag,
Weight: 5kg per bag.

Outer packing: cardboard carton, cardboard barrel, plastic barrel
Net Weight:
20kg/ cardboard carton, 25kg/ cardboard carton,
40kg /cardboard barrel, 50kg /cardboard barrel,
20kg/ plastic barrel, 25kg/ plastic barrel.

All rights reserved by UCOLIN GLAZING SUPPORT:
www.Ucolin.com
Main Products: Silicone vacuum bag for EVA laminating furnace, Silicone Sheet, Glass Edging Wheels, Polishing Powders.

Cerium Oxide CeO2 Polishing Powder in Crystal by Peter Lin

Cerium Oxide CeO2 Polishing Powder in Ceramic

Cerium Oxide CeO2 Polishing Powder in Ceramic
UCO-338

Main technical data:
REO≥75%
CeO2/REO≥75%
Fluorine content：3%
Average granularity D50：1.4μm
Granularity: 800#-1000#
PH value: 7
Color: Off white

UCO-338 Ceramic Polishing Powder is especially used for polishing ceramics, tile, etc. It has many advantages, including strong cutting force, high polishing speed, high gloss finish, good suspensibility, not easy to settle. The polishing effect of brownish red polishing powder is three times better than that of normal ceramic polishing powder.

Main features:
1. High polishing speed, great grinding ability, no scratch.
2. Small amount and low concentration of polishing powder can make the optimum polishing effect.
3. Good polishing brightness, High content of Cerium Oxide, reasonable collocation of the crudeness and fineness, applicable to polishing different ceramics and tiles.
4. Good suspensibility, not easy to settle. And even if the powder is settled for a long time, it is still easy to stir up without bubbles.
5. Environmental-friendly, neutral in PH value, water-fast, good adhesive force, easy to wash, no odors, humidity-resistant, long life time.

Applicable fields:
This serial of polishing powder has been widely applied for the final polishing of ceramics and tiles.

All rights reserved by UCOLIN GLAZING SUPPORT:
www.Ucolin.com
Main Products: Silicone vacuum bag for EVA laminating furnace, Silicone Sheet, Glass Edging Wheels, Polishing Powders.

Cerium Oxide CeO2 Polishing Powder in Ceramic by Peter Lin

Cerium Oxide Polishing Powder in Glass

Cerium Oxide Polishing Powder in Glass
UCO228
UCO228 Polishing Powder is especially used for polishing flat glass, art glass, etc. It has many advantages, including strong cutting force, high polishing speed, high gloss finish, good suspensibility, not easy to settle. The polishing effect of brownish red polishing powder is three times better than that of normal glass polishing powder.

Main features:
1-High polishing speed, great grinding ability, no scratch.

2-Small amount and low concentration of polishing power can make the optimum polishing effect.

3- Good polishing brightness, High content of Cerium Oxide, reasonable collocation of the crudeness and fineness, applicable to polishing different glasses.

4-Good suspensibility, not easy to settle. And even if the powder is settled for a long time, it is still easy to stir up with no bubbles.

5-Environmental-friendly, neutral in PH value, water-fast, good adhesive force, easy to wash, no odors, humidity-resistant, long life time.

Applicable fields:
This serial of polishing powder has been widely applied for the final polishing of glass deep processing, such as flat glass, conductive glass, extra thin glass and other glass lens.
Main technical data:
REO≥70%
CeO2/REO≥75%
Fluorine content：3.2%
Average granularity D50：1.5μm
Granularity: 800#-1000#
PH value: 7

Packing:
Inner packing: plastic bag,
Weight: 5kg per bag.
Outer packing: cardboard carton, cardboard barrel, plastic barrel
Net Weight:
20kg/ cardboard carton, 25kg/ cardboard carton,
40kg /cardboard barrel, 50kg /cardboard barrel,
20kg/ plastic barrel, 25kg/ plastic barrel.

All rights reserved by UCOLIN GLAZING SUPPORT:
www.Ucolin.com
Main Products: Silicone vacuum bag for EVA laminating furnace, Silicone Sheet, Glass Edging Wheels, Polishing Powders.

Cerium Oxide Polishing Powder for Glass Edging Machines by Peter Lin

Glass Cutting Tools Glass Cutters

Silicone Vacuum Bag for EVA Glass Laminating Machine&Autoclave

Silicone Vacuum Bag for EVA Glass Laminating Machine Autoclave

Silicone Vacuum Bag for EVA Glass Laminating Machine&Autoclave

By Zac Lynn

+The combination of the silicone bag:

-Upper Silicone Sheet
-Down Silicone Sheet
-Edge Gear
-Silicone Tube

+Technical Parameters of Silicone Vacuum Bag

Tensile strength
Tearing strength
Hardness
Breaking extensibility

Color
Pattern Temperature Resistance
6.5(Mpa) 26(N/mm) 55±5(Shore A) 450% Transparent
One smooth
One cloth grain 230 °C

+Description:
-Product Purpose: used for glass vacuum laminating machines to make
safety laminated glass with EVA FILM INTERLAYER, or for making privacy glass, switchable glass with PDLC FILM and EVA FILM
-Product features: heat-resistant, aging-resistance , anti-corrosive,environment-friendly, Long-use life, good resistance

+Product specification:
1) common thickness: 3mm
2) maximum width:3800mm with no joint
3) any length
4) common color: transparent,red, and any color available
Customization is available as customers require

+Notes When Using the Silicone Vacuum Bag

-Please edging the glass before laminating, which can prohibit the sharp glass edges of the glass cut the silicone bag.
-Use tape to seal the pre-laminated glass to reduce the EVA leaking from the laminated glass.
-Use some papers/fabric to cover the silicone bag to separate the EVA from the silicone bag
-Put some wires net on the vacuum hole to help vacuuming.
-When not laminating , put the silicone bag out of the hot oven.

+ Procedure of Ordering:
(1)Be ware of the kind of silicone you need: for EVA glass lamination or for solar encapsulation.

(2)If you need silicone vacuum bag for EVA glass lamination, please offer the internal size and external size of the silicone bag.

If you need silicone rubber sheet for solar encapsulation, please offer the thickness, width, length.