Outdoor type of milky white eva film interlayer for laminated safety glass

Outdoor type of milky white eva film interlayer for laminated safety glass

There is very important thing we need to inform you.
You have ordered milky white opaque eva film in 2015.
But since 2016, we have upgraded the [milky white opaque] to OUTDOOR type.
The difference between [ milky white opaque 2015] and [milky white opaque OUTDOOR 2016] is:
1-[milky white opaque OUTDOOR 2016] is strengthened in UV blocking rate and UV aging resistance, and it can be used in both outdoor and indoor environment.
Written by Peter Lin, All rights reserved by [email protected].
2-[milky white opaque OUTDOOR 2016] may require 125 C degrees heating temperature. [milky white opaque OUTDOOR 2016] requires higher heating temperature than [ milky white opaque 2015]

3-not just milky white opaque, also other white eva films, from now on, we will supply the OUTDOOR type of all white EVA film series to replace the old ones.

4-[milky white opaque OUTDOOR 2016] is supposed to be 0.2USD/sqm higher than [ milky white opaque 2015] , but we will keep the same price for you as before.
Written by Peter Lin, All rights reserved by [email protected].
Ask
Also we have some questions about your White opaque 2016
1. The color is the same as White opaque 2015?
2. We need it for facade so is for outdoor, my question is this if we use White opaque 2015 is any problem for the UV?
3. Currently in production, we spent 4 hours aprox to laminate but if we use White opaque 2016 how much time are we going to use?

Answer
1-No, The color is not the totally same as White opaque 2015, the White oapque 2016 is more bright in white, white 2016 is more bright in white than white 2015, but the difference is small.
2-White 2015 is recommended to be used in door. White 2016 has good UV stable as super clear eva film.
3-Just a little higher temperature, the time cycle will be the same.

Regarding the super milky whtie, and white translucent 65%, now we have developed ourdoor type since 2016.
The diffence is:
OUTDOOR TYPE can used in outdoor environment, good at UV aging resistance, and of course also can be used in indoor environment.
OUTDOOR TYPE requires higher heating temperature, 125C DEGREES
OUTDOOR TYPE is more pure “white” in color.

2016 outdoor type white eva film interlayer

PET Green tape is to hold down the bussing bar during the lamination (165 Celsius)

PET Green tape is to hold down the bussing bar during the lamination (165 Celsius) (1)

PET Green tape is to hold down the bussing bar during the lamination (165 Celsius) (2)
PET Green tape is to hold down the bussing bar during the lamination (165 Celsius)

Green tape for solar encapsulation. The purpose of this green tape is to hold down the bussing bar during the lamination (165 Celsius) and then peel the green tape off to use it for holding down the junction box’s cables.