Cerium Oxide CeO2 Jade Polishing Powder 668-4

Cerium Oxide CeO2 Jade Polishing Powder 668-4
Cerium Oxide CeO2 Jade Polishing Powder 668-4

Applied in polishing of all kinds of ,jade. Jadeite.
REO≥90%
CeO2/REO≥80%
Fluorine content:3.0%
Average granularity D50:1.5μm
Granularity: 1500# -1800#
PH value: 7
Color: Light yellow

Cerium Oxide CeO2 Jade Polishing Powder 668-4 is especially used for polishing jade etc. Compared with other normal polishing powder, this Cerium Oxide CeO2 Jade Polishing Powder 668-4 is best in physical and chemical properties, and the polishing efficiency of Cerium Oxide CeO2 Jade Polishing Powder 668-4 is 3 times better than other market polishing powder.
Cerium Oxide CeO2 Polishing Powder for Glass Polishing_conew1

Main features:
1-High polishing speed, great grinding ability, no scratch.
2-Small amount and low concentration of Cerium Oxide CeO2 Jade Polishing Powder 668-4 can make the optimum polishing effect. Save cost.
3-Good polishing brightness, High content of Cerium Oxide, reasonable collocation of the crudeness and fineness, applicable to polishing jade, etc.
4-Good suspensibility, not easy to settle. And even if the powder is settled for a long time, it is still easy to stir up without bubbles.
5-Environmental-friendly, neutral in PH value, water-fast, good adhesive force, easy to wash, no odors, humidity-resistant, long life time.

Packing:
Inner packing: plastic bag,
Weight: 5kg per bag.
Outer packing: cardboard carton, cardboard barrel, plastic barrel
Net Weight:
20kg/ cardboard carton, 25kg/ cardboard carton,
40kg /cardboard barrel, 50kg /cardboard barrel,
20kg/ plastic barrel, 25kg/ plastic barrel.

All rights reserved by UCOLIN GLAZING SUPPORT:
www.Ucolin.com
Main Products: Silicone vacuum bag for EVA laminating furnace, Silicone Sheet, Glass Edging Wheels, Polishing Powders.

Cerium Oxide CeO2 Jade Polishing Powder 668-4 by Peter Lin

Cerium Oxide CeO2 Gemstone Jewel Polishing Powder 668-3

Cerium Oxide CeO2 Gemstone Jewel Polishing Powder 668-3

Implied in polishing of all kinds of Gemstone, jewel, jade.
REO≥86.5%
CeO2/REO≥82.5%
Fluorine content:3.1%
Average granularity D50:1.5μm
Granularity: 1200# -1500#
PH value: 7
Color: Light yellow

Cerium Oxide CeO2 Gemstone Jewel Polishing Powder 668-3 is especially used for polishing Gemstone, jewel, jade etc. Compared with other normal polishing powder, this Cerium Oxide CeO2 Gemstone Jewel Polishing Powder 668-3 can reduce 10% of concentration of jade polishing liquidity, and fasten 33% of polishing efficiency, and prolong 28% useful life of polishing powder, and the finish smoothness is 2 times better.
Cerium Oxide CeO2 Polishing Powder for Glass Polishing_conew1

Main features:
1-High polishing speed, great grinding ability, no scratch.
2-Small amount and low concentration of Cerium Oxide CeO2 Gemstone Jewel Polishing Powder 668-3 can make the optimum polishing effect. Save cost.
3-Good polishing brightness, High content of Cerium Oxide, reasonable collocation of the crudeness and fineness, applicable to polishing Gemstone, jewel, jade, etc.
4-Good suspensibility, not easy to settle. And even if the powder is settled for a long time, it is still easy to stir up without bubbles.
5-Environmental-friendly, neutral in PH value, water-fast, good adhesive force, easy to wash, no odors, humidity-resistant, long life time.

Packing:
Inner packing: plastic bag,
Weight: 5kg per bag.
Outer packing: cardboard carton, cardboard barrel, plastic barrel
Net Weight:
20kg/ cardboard carton, 25kg/ cardboard carton,
40kg /cardboard barrel, 50kg /cardboard barrel,
20kg/ plastic barrel, 25kg/ plastic barrel.

All rights reserved by UCOLIN GLAZING SUPPORT:
www.Ucolin.com
Main Products: Silicone vacuum bag for EVA laminating furnace, Silicone Sheet, Glass Edging Wheels, Polishing Powders.

Cerium Oxide CeO2 Gemstone Jewel Polishing Powder 668-3 by Peter Lin

Cerium Oxide CeO2 Millstone Polishing Powder 668-2

Cerium Oxide CeO2 Millstone Polishing Powder 668-2

Main technical data:
REO≥88%
CeO2/REO≥83%
Fluorine content:2.8%
Average granularity D50:1.5μm
Granularity: 1200# -1500#
PH value: 7
Color: Light yellow

Cerium Oxide CeO2 Millstone Polishing Powder 668-2 is especially used for polishing millstone processing. Compared with other normal crystal polishing powder, this Cerium Oxide CeO2 Millstone Polishing Powder 668-2 owns there advantages: strong cutting ability, fast polishing speed, great finish smoothness, good suspension property, don’t subside. Cerium Oxide CeO2 Millstone Polishing Powder 668-2 is 3 times better then other brand polishing powder.

Cerium Oxide CeO2 Polishing Powder for Glass Polishing_conew1

Main features:
1. High polishing speed, great grinding ability, no scratch.
2. Small amount and low concentration of Cerium Oxide CeO2 Millstone Polishing Powder 668-2 can make the optimum polishing effect. Save cost.
3. Good polishing brightness, High content of Cerium Oxide, reasonable collocation of the crudeness and fineness, applicable to polishing millstone.
4-Good suspensibility, not easy to settle. And even if the powder is settled for a long time, it is still easy to stir up without bubbles.
5- Environmental-friendly, neutral in PH value, water-fast, good adhesive force, easy to wash, no odors, humidity-resistant, long life time.

Applicable fields:
This serial of polishing powder is applicable for the final polishing of millstone.

Packing:
Inner packing: plastic bag,
Weight: 5kg per bag.
Outer packing: cardboard carton, cardboard barrel, plastic barrel
Net Weight:
20kg/ cardboard carton, 25kg/ cardboard carton,
40kg /cardboard barrel, 50kg /cardboard barrel,
20kg/ plastic barrel, 25kg/ plastic barrel.

All rights reserved by UCOLIN GLAZING SUPPORT:
www.Ucolin.com
Main Products: Silicone vacuum bag for EVA laminating furnace, Silicone Sheet, Glass Edging Wheels, Polishing Powders.

ZAC LYNN. UCOLINcdr

 

Cerium Oxide CeO2 Millstone Polishing Powder 668-2 by Peter Lin


 

Cerium Oxide CeO2 Polishing Powder in Crystal

Cerium Oxide CeO2 Polishing Powder in Crystal
Cerium Oxide CeO2 Polishing Powder in Crystal
UCO-668
Model: Crystal Polishing Powder szf-668
Main technical data:
REO≥85%
CeO2/REO≥80%
Fluorine content:3%
Average granularity D50:1.5μm
Granularity: 1200# -1500#
PH value: 7
Color: Light yellow

Crystal Polishing Powder is especially used for polishing crystal, crystal lamp etc. Compared with other normal crystal polishing powder, this crystal polishing powder can decrease 11% of the polishing powder liquid concentration, and the polishing effect can increase 35%. Besides, the gloss finish of the finished product can get higher grade, and the yellow polishing powder’s life time increases 30%.
Cerium Oxide CeO2 Polishing Powder for Glass Polishing_conew1

Main features:
1. High polishing speed, great grinding ability, no scratch.
2. Small amount and low concentration of polishing powder can make the optimum polishing effect.
3. Good polishing brightness, High content of Cerium Oxide, reasonable collocation of the crudeness and fineness, applicable to polishing various crystals, rhinestone, millestone, etc.
4. Good suspensibility, not easy to settle. And even if the powder is settled for a long time, it is still easy to stir up without bubbles.
5. Environmental-friendly, neutral in PH value, water-fast, good adhesive force, easy to wash, no odors, humidity-resistant, long life time.

Applicable fields:
This serial of polishing powder is applicable for the final polishing of crystals, crystal lamp, crystal accessories.

Packing:
Inner packing: plastic bag,
Weight: 5kg per bag.

Outer packing: cardboard carton, cardboard barrel, plastic barrel
Net Weight:
20kg/ cardboard carton, 25kg/ cardboard carton,
40kg /cardboard barrel, 50kg /cardboard barrel,
20kg/ plastic barrel, 25kg/ plastic barrel.

All rights reserved by UCOLIN GLAZING SUPPORT:
www.Ucolin.com
Main Products: Silicone vacuum bag for EVA laminating furnace, Silicone Sheet, Glass Edging Wheels, Polishing Powders.
ZAC LYNN. UCOLINcdr

Cerium Oxide CeO2 Polishing Powder in Crystal by Peter Lin

Cerium Oxide CeO2 Polishing Powder in Ceramic

Cerium Oxide CeO2 Polishing Powder in Ceramic

Cerium Oxide CeO2 Polishing Powder for Glass Polishing_conew1

Cerium Oxide CeO2 Polishing Powder in Ceramic
UCO-338

Main technical data:
REO≥75%
CeO2/REO≥75%
Fluorine content:3%
Average granularity D50:1.4μm
Granularity: 800#-1000#
PH value: 7
Color: Off white

UCO-338 Ceramic Polishing Powder is especially used for polishing ceramics, tile, etc. It has many advantages, including strong cutting force, high polishing speed, high gloss finish, good suspensibility, not easy to settle. The polishing effect of brownish red polishing powder is three times better than that of normal ceramic polishing powder.

Main features:
1. High polishing speed, great grinding ability, no scratch.
2. Small amount and low concentration of polishing powder can make the optimum polishing effect.
3. Good polishing brightness, High content of Cerium Oxide, reasonable collocation of the crudeness and fineness, applicable to polishing different ceramics and tiles.
4. Good suspensibility, not easy to settle. And even if the powder is settled for a long time, it is still easy to stir up without bubbles.
5. Environmental-friendly, neutral in PH value, water-fast, good adhesive force, easy to wash, no odors, humidity-resistant, long life time.

Applicable fields:
This serial of polishing powder has been widely applied for the final polishing of ceramics and tiles.

Packing:
Inner packing: plastic bag,
Weight: 5kg per bag.
Outer packing: cardboard carton, cardboard barrel, plastic barrel
Net Weight:
20kg/ cardboard carton, 25kg/ cardboard carton,
40kg /cardboard barrel, 50kg /cardboard barrel,
20kg/ plastic barrel, 25kg/ plastic barrel.

All rights reserved by UCOLIN GLAZING SUPPORT:
www.Ucolin.com
Main Products: Silicone vacuum bag for EVA laminating furnace, Silicone Sheet, Glass Edging Wheels, Polishing Powders.

Cerium Oxide CeO2 Polishing Powder in Ceramic by Peter Lin

Cerium Oxide Polishing Powder in Glass

Cerium Oxide Polishing Powder for Glass_conew1

 

Cerium Oxide Polishing Powder in Glass

Cerium Oxide Polishing Powder in Glass
UCO228
UCO228 Polishing Powder is especially used for polishing flat glass, art glass, etc. It has many advantages, including strong cutting force, high polishing speed, high gloss finish, good suspensibility, not easy to settle. The polishing effect of brownish red polishing powder is three times better than that of normal glass polishing powder.

Main features:
1-High polishing speed, great grinding ability, no scratch.

2-Small amount and low concentration of polishing power can make the optimum polishing effect.

3- Good polishing brightness, High content of Cerium Oxide, reasonable collocation of the crudeness and fineness, applicable to polishing different glasses.

4-Good suspensibility, not easy to settle. And even if the powder is settled for a long time, it is still easy to stir up with no bubbles.

5-Environmental-friendly, neutral in PH value, water-fast, good adhesive force, easy to wash, no odors, humidity-resistant, long life time.

Applicable fields:
This serial of polishing powder has been widely applied for the final polishing of glass deep processing, such as flat glass, conductive glass, extra thin glass and other glass lens.
Main technical data:
REO≥70%
CeO2/REO≥75%
Fluorine content:3.2%
Average granularity D50:1.5μm
Granularity: 800#-1000#
PH value: 7

Packing:
Inner packing: plastic bag,
Weight: 5kg per bag.
Outer packing: cardboard carton, cardboard barrel, plastic barrel
Net Weight:
20kg/ cardboard carton, 25kg/ cardboard carton,
40kg /cardboard barrel, 50kg /cardboard barrel,
20kg/ plastic barrel, 25kg/ plastic barrel.

All rights reserved by UCOLIN GLAZING SUPPORT:
www.Ucolin.com
Main Products: Silicone vacuum bag for EVA laminating furnace, Silicone Sheet, Glass Edging Wheels, Polishing Powders.

Cerium Oxide Polishing Powder for Glass Edging Machines by Peter Lin