Silicone Vacuum Bag for EVA Glass Laminating Machine Autoclave
Silicone Vacuum Bag for EVA Glass Laminating Machine&Autoclave
By Zac Lynn
+The combination of the silicone bag:
-Upper Silicone Sheet
-Down Silicone Sheet
-Edge Gear
-Silicone Tube
+Technical Parameters of Silicone Vacuum Bag
Tensile strength
Tearing strength
Hardness
Breaking extensibility
Color
Pattern Temperature Resistance
6.5(Mpa) 26(N/mm) 55±5(Shore A) 450% Transparent
One smooth
One cloth grain 230 °C
+Description:
-Product Purpose: used for glass vacuum laminating machines to make
safety laminated glass with EVA FILM INTERLAYER, or for making privacy glass, switchable glass with PDLC FILM and EVA FILM
-Product features: heat-resistant, aging-resistance , anti-corrosive,environment-friendly, Long-use life, good resistance
+Product specification:
1) common thickness: 3mm
2) maximum width:3800mm with no joint
3) any length
4) common color: transparent,red, and any color available
Customization is available as customers require
+Notes When Using the Silicone Vacuum Bag
-Please edging the glass before laminating, which can prohibit the sharp glass edges of the glass cut the silicone bag.
-Use tape to seal the pre-laminated glass to reduce the EVA leaking from the laminated glass.
-Use some papers/fabric to cover the silicone bag to separate the EVA from the silicone bag
-Put some wires net on the vacuum hole to help vacuuming.
-When not laminating , put the silicone bag out of the hot oven.
+ Procedure of Ordering:
(1)Be ware of the kind of silicone you need: for EVA glass lamination or for solar encapsulation.
(2)If you need silicone vacuum bag for EVA glass lamination, please offer the internal size and external size of the silicone bag.
If you need silicone rubber sheet for solar encapsulation, please offer the thickness, width, length.
All rights reserved by
UCOLIN SILICONE
SILICONE VACUUM BAG FOR EVA LAMINATING MACHINE
SILICONE VACUUM BAG FOR PVB AUTOCLAVE VACUUMING
[email protected]
www.ucolin.com www.silicone4.com
